MA Lighting grandMA2 User Manual - page 1362
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
If a macro is edited and
Default Go
is pressed, the system will NOT enter DefaultGo in the macro-line, but execute
the next cue in the selected executor.
Intensity Btn Background
The background light of the keys on the console can be set. Follow these steps:
1. Tap the green square in the
Intensity Btn Background
area.
2. Tap the intensity as a number between 0 and 79. 0 is no light and 79 is full.
Intensity Btn Highlight
The highlight light of the keys on the console can be set. Follow these steps:
1. Tap the green square in the
Intensity Btn Highlight
area.
2. Tap the intensity as a number between 0 and 255. 0 is no light and 255 is full.
Intensity Exec LED
The background light of the executors on the console can be set. Follow these steps:
1. Tap the green square in the
Intensity Exec LED
area.
2. Tap the intensity as a number between 0 and 255. 0 is no light and 255 is full.
Intensity Desk Lamp
The desklight on the console can be set. Follow these steps:
1. Tap the green square in the
Intensity Desk Lamp
area.
2. Tap the intensity as a number between 0 and 255. 0 is no light and 255 is full.
Intensity 9 Inches
The backlight of the screens on the console can be set. Follow these steps to set the backlight of the 9-inch
screens:
1. Tap the green square in the
Intensity 9-inch
area.
2. Tap the intensity as a number between 0 and 255. 0 is dark and 255 is bright.
Intensity 15 Inches
The backlight of the screens on the console can be set. Follow these steps to set the backlight of the 15-inch
screens:
1. Tap the green square in the
Intensity 15-inch
area.
2. Tap the intensity as a number between 0 and 255. 0 is dark and 255 is bright.
1362