MA Lighting grandMA2 User Manual - page 867
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Empty
:
The key has no function.
<<< (GoFastBack)
:
This jumps one cue back - The fade timing can be changed in Setup -> Show -> Playback & MIB Timing.
>>> (GoFastForward)
:
This jumps one cue forward and will not trigger other cues - The fade timing can be changed in Setup -> Show -
> Playback & MIB Timing.
Black
:
This turns off the intensity of the executor as long as you have the button pressed.
DoubleSpeed
:
This will double the speed.
DoubleRate
:
This will double the rate.
Fix
:
This fixes or unfixes the executor.
Flash
:
This turns the executor on and set a virtual intensity master at 100, as long as you have the button pressed. When
the button is released it will go back to the status before the button was pressed.
FlashOn
:
This performs the same action as the Flash, but it also executes an On command.
FlashGo
:
This performs the same action as the Flash, but it also executes a Go command.
Go
:
This executes a "Go". It uses the fade and delay times.
GoBack
:
This fades backwards - The fade timing can be changed in Setup -> Show -> Playback & MIB Timing. Default is
the cue timing.
867