MA Lighting grandMA2 User Manual - page 1070
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
3. Import an image, which only displays a white bar, in the image pool.
Image white bar
Note:
It is possible to use predefined images and videos also. For more information on how to import
predefined images and videos see
.
4. Create two position presets in the position preset pool, the first with the lowest pan 0 and tilt 30, the second
position preset with pan 0 and tilt -5.
5. Program the bitmap fixture in the programmer with the following values:
-
Dimmer
: 100
-
Images
: The white bar image from the image pool, e.g., 15.
-
Output
: The layout including the bitmap fixture visualization, e.g., Layout 1.
-
Mode
: Position Preset
-
VP1
: Select position preset with low value
-
VP2
: Select position preset with high value
6. Tap in the encoder bar effect layer, tap
VPos
(= Video Position) in the fixture sheet, turn the encoder for the
x value and select
Ramp Plus 10
.
7. To store a sequence with the bitmap fixture, press
Store
and then another executor button than before.
8. Start both playbacks.
You have a pan tilt effect by using the bitmap fixture.
Stage view with running bitmap fixture
31.6. Priorities for bitmap effects
1070