MA Lighting grandMA2 User Manual - page 745
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Attribute & Encoder Grouping
4. The dialog
Edit Setup/Fixture Type/Attribute & Encoder Grouping
opens.
5. To edit or create new encoder grouping:
-Choose a preset type in the
List of Preset Types
at the top on the left.
-After that, choose a feature in
Features of Preset Type
at the top on the right.
-Then tap and hold the column "Encoder Grouping" in
Attributes of Feature
at the bottom on the left.
-The pop-up
Select Group
opens.
-Choose one of the groups in this pop-up.
-To create a new group, scroll down and tap
New Group
.
Hint:
Many attributes are already grouped, for example the function pan and tilt or RGB.
Pan and tilt is grouped since the position a fixture occupies has two directions.
RGB is grouped, because the color consists of a mixture between red, green and blue.
15.7. Using The Color Picker
Based on the field you work in, the color picker provides the opportunity of displaying the colors of fixtures in various
views.
Requirement:
Fixtures are patched.
For more information on how to patch fixtures see
.
Open the Color Picker
745