MA Lighting grandMA2 User Manual - page 601
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
User rights
There are seven different levels of user rights.
When editing the Rights cell in a User, then you will get a small pop-up that lists the following users:
Admin
- This is full rights to change everything in the console, system and show.
Setup
- This will limit access to some of the elements in the console. The user cannot access the User & Profile
Setup! There are other console settings that can be accessed.
Program
- In this level the user cannot do major changes to the Fixture Schedule. It only gives access to the
"Patch Only". Most programming operations can be done.
Presets
- This level allows to update existing presets. But the user cannot edit the cue content.
Playback
- This level allows to playback and run a programmed show. But the user cannot store anything.
None
- With this user right it is not allowed to use a programmer. The user is allowed to run executors and
change views.
You can only change the rights when the user is not logged in.
Assigning worlds to User Profiles
Assigning a world to a User Profile will limit the Users assigned to this User Profile to only use the assigned World. It
is not possible for the user to change world.
The default option is
None
. This means that the user is not limited.
Editing a cell in the World column will open up a small
Select World pop-up
. This will list the None option and all
the created worlds in the show file.
Selecting the "Full 1" world will give the user access to every fixture and attribute, but the user is locked from
changing world.
Worlds can be assigned using the command line.
To assign world number 4 to user profile number 3 use the following command:
[Channel]> Assign World 4 UserProfile 3
Create a new User Profile and a User
To create a new user with a new user profile you will need to do the following (you need to be logged in as a user
with Admin rights):
1. Press the
Setup
key.
2. Tap the
User & Profiles Setup
.
3. Tap the cell with "New" in the lowest "
UserProfiles
" section - you might need to scroll down.
4. Tap the
Add Profiles
button.
5. Change the Name of the user profile to something that makes sense.
6. Tap the cell with "New" in the top "
Users
" section - you might need to scroll down.
7. Tap the
Add User
button.
601