MA Lighting grandMA2 User Manual - page 898
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Pages that have something assigned will have a white label text when the pool is in pool style. Pages that have
been accessed but is empty will have a gray text color. Pages that has not been accessed and does not have
anything stored are empty in the pool.
Change page
Pages can be access by tapping the pool objects. This will make both the Fader Executors and the Button Executors
jump to this page.
Pages can also be changed using the dedicated
Fd Pg +
and
Fd Pg -
keys to change the page for the Fader
Executors. Read about the keys in the
and
topics. Keeping the
Fd Pg -
key pressed for 2 seconds
will jump to page 1 for the faders.
The Button Executor pages can be changed using the
keys. Read about the keys in the
key pressed for 2 seconds will jump to page 1 for the buttons.
In
Setup -> User -> Grand Master & Misc Keys
there is a setting called
Link Fader & Button Page
. If this is active
then there is no separation between the Fader and Button page changes. Chaining pages using any the four keys
mentioned above will change page for both Faders and Buttons at the same time.
Pages can also be changed using the command line. There are three different relevant commands:
, and
. Click them to read the details about the commands.
There are three different commands to make it possible to change the Fader Executors and Button Executors
independently using each of the two commands. But it is also possible to change both at the same time using the
Page
command.
Pages can be changed by using the page number or page name.
Examples
Change the Fader Executors to page 5:
[Channel]> FaderPage 5
Change the Button Executors to page 20:
[Channel]> ButtonPage 20
Change both faders and buttons to a page called
Rainbow
:
[Channel]> Page Rainbow
898