MA Lighting grandMA2 User Manual - page 1266
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Realtime performance window
The performance window is a monitor of internal workloads and a debug tool. It has two different modes,
Realtime
and
Draw
. As default it opens in realtime.
It is a monitor of the workload of the desk. The first six rows are incoming traffic and the last rows are outgoing
traffic.
The different loads have different colors:
Red - DMX data
Green - MA Net feedback
Blue - Station feedback (MA stations = 1 ms / Windows > 1 ms)
Yellow - Network Protocols
The lines on the left side of the view are showing tasks with a high calculation priority. The lines on the right side
shows tasks with a normal priority.
The small line that are only 2 rows high, show traffic via USB connections (Command and Fader Wing for example)
while the long lines that are 8 rows high, show traffic via ethernet or DMX.
The traffic for incoming USB connections are on line 7 and 8, while outgoing USB traffic is on line 9 and 10.
If the yellow lines (Art-Net traffic for example) are shown side by side in the lower part, then there is a delay on the
outputted universes. To adjust this delay go to Setup - Network – Network Protocols and adjust the Delay column.
There are two buttons in the upper right corner of the Performance window
Pause
freezes the display
Realtime/Draw
switch the window between
Realtime
and
Draw
1266