MA Lighting grandMA2 User Manual - page 1256
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
3. To edit a slot, tap the button displayed below Data Slot 1 and Data Slot 2.
-The
pop-up Slot Properties
opens.
Adjust slot properties
-To select a source type, tap the drop-down box and tap the corresponding protocol in the list.
-To select a source mode, tap the drop-down box and tap a source mode in the list.
-To enter a patch address, type into the green input field or tap the
and the calculator opens.
4. Now, tap
Please
.
The properties of the slot are now applied.
Hint:
-To enable 1024 channels for the configuration patch, select
Double Universe
in the Source Mode and
DMX
in the Source Type. DMX In 1 and 2 of the NDP are used in one slot.
-If you select
Art-Net, MA-Net2 or sACN
in the Source Type and
Double
Universe
in the Source Mode,
specify the two universes individually.
5. To edit universes, tap the button displayed below Input Config.
-The
pop-up Input Properties
opens.
1256