MA Lighting grandMA2 User Manual - page 1332
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
3. Tap at a cell in the row of the MA Network Switch you like to edit and tap
Edit Preset
.
The
Set Switch Presets pop-up
opens.
Set Switch Presets pop-up
4. Navigate to the to be edited port.
To block the preset press the screen encoder once until the background of the preset cell is red.
To allow the preset only press the screen encoder twice until the background of the preset cell is green.
5. Press
Please
or tap
Please
.
The preset is assigned to the port and saved in the startup configuration. The
filter icon
is visible in the port cell
and on the front end display of the MA Network Switch.
48.9. Edit Link Aggregation Groups of the MA Network Switch
The Link Aggregation Group (= LAG) combines several physical ports to create a single high-bandwidth data path as
well as to implement the traffic load shared among the member ports in a group. LAG enhances the connection
reliability and efficiency.
The first port joining an LAG sets its settings – group, speed, etc., – to default settings of the LAG.
Requirement:
Add MA Network Switch to the network configuration
To edit LAGs:
1. Open the
MA Network Configuration
:
-Press
Setup
and tap
Network
MA Network Configuration
.
-The window
MA Network Configuration
opens.
1332