MA Lighting grandMA2 User Manual - page 582
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Backup Options
The backup options allows access to setup a file server and activate Auto Save.
The server setup can be complicated, so it has it own help topic - please read about it
.
Auto Save
Auto Save can be set up to automatically store show file after a certain amount of time.
The default setting is "Off". The other options are 15, 30, 60 and 120 minutes.
If auto save is activated - by selecting a time interval - then a count down can be seen next to the label.
When the count down reaches Zero, then it will save the show on the selected drive/tab. If a tab is selected that
does not allow for saving, then it will save in the Internal drive.
Read the following pages to read about the different operations that can be done in the tabs.
10.1. Create a new show
Several tabs in the backup menu offers the option to start a new show. It is not possible in the read only tabs.
The New Show pop-up
Pressing the new show button in the backup menu opens a pop-up that could look like this:
582