MA Lighting grandMA2 User Manual - page 744
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Empty Programmer
15.6. Encoder Grouping
Encoder grouping is used to collectively take attributes into the programmer.
Important:
It is advisable to set the encoder grouping before creating a new show. That is, before generating
presets. Particularly when using the function "Encoder Grouping" in the menu
Auto Create Presets
.
Important:
Encoder groupings are non user-definable. That is, once created, they are valid for the entire show file.
How To Group Encoders
1. Tap
Setup -> Patch and Fixture Schedule
2. Then tap
Fixture Types
on the right of the dialog
EditSetup
3. Tap
Attribute & Encoder Grouping
on the right of the dialog Fixture Types.
744