MA Lighting grandMA2 User Manual - page 1212
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
A new mode is set and transmitted via RDM to the RDM fixture.
Way B:
1. Open the RDM devices window. Press
Setup
, and tap under
Show
at
Patch & Fixture Schedule
.
The
Edit Setup
opens.
2. Tap in the lower right corner at
RDM devices
.
The
RDM devices window
opens. In this window, you can set the parameter of the DMX personality and the
DMX start address of the RDM fixture.
RDM devices window
3. To select the fixture type you like set parameters to, tap at under
Discovered RDM FixtureTypes
at the fixture
type.
The fixtures to the selected fixture type are displayed on the right side of the RDM devices window.
4. To select the fixture, tap at the fixture in the table on the right screen side.
1212