MA Lighting grandMA2 User Manual - page 1273
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
4. Activating
Always ask for Name
(tap it until the text is yellow), gives an opportunity to give the XML file a
different name than the effect. If more than one effect is selected, you will always be asked for a new name.
5. Tap
Export
6. Depending on the selections, you might be prompted for a name for the XML file.
Result:
The selected effects are exported to the selected drive (Internal or to an USB stick)
Export a Gobo Bitmap
To export a Gobo Bitmap, a USB stick has to be plugged in the console or the onPC.
Open the
Setup menu
and tap
Import Export
followed by
Export
and finally
Gobo Bitmap
This opens a pop-up like this:
Export gobo bitmap pop-up
Steps:
1. If more than one USB stick is connected, select the tab where to export the gobo bitmap to. A USB stick
called "Shows" is selected in the image above.
2. Select the manufacture and then pick the bitmap to export on the left side. Select multiple bitmaps by
holding
Ctrl
on the keyboard and tapping the bitmaps in the list. The selected bitmaps get a yellow
background.
3. On the right side, there is a list of existing bitmaps on the destination, selected in the tab above.
4. Tap
Export
1273