MA Lighting grandMA2 User Manual - page 1154
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
6. To set a link to an executor, tap
Exec Trigger
.
-The
pop-up Select Exec Trigger
opens.
Link timer to an executor
-If you do not want to set a link to an executor, tap
Not linked
.
Exec Triggers
LinkSelected-Start
and
LinkSelected-Toggle
are linked to the executors you have selected.
-If an executor is linked as
LinkSelected-Start
, the commands GO, GOTO, and TOP start the timer.
-If an executor is linked as
LinkSelected-Toggle
, the timer toggles between start and pause.
LinkLastGo-Start
and
LinkLastGo-Toggle
are linked to all executors, also the ones you have selected.
-If the link is set as
LinkLastGo-Start
, the commands GO, GOTO, and TOP start the timer on all executors.
-If the link is set as
LinkLastGo-Toggle
, the timer toggles between start and pause on all executors.
7. Label the timer you have set:
8. -Tap
Label
and an editor opens.
-Type the name of the timer and press
Please
.
9. Set countdown time and alert duration:
-Tap the green button below
Countdown Time
and the calculator opens.
-Enter the time of the countdown.
-Tap the green button below
Alert Duration
and the calculator opens.
-Enter the duration of the alert.
1154