MA Lighting grandMA2 User Manual - page 1343
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
48.14. Reset the MA Network Switch to its factory defaults
By resetting the MA Network Switch, you return the switch to the state it was in when it was first time powered.
This is useful for troubleshooting problems that might be caused by manual changes after first time powered.
Refer to the
for a complete list of all settings and information they are reset.
Resetting the MA Switch is not reversible. After a reset, all previous settings are lost and cannot be recovered.
1. Open the MA Network Configuration.
- Press
Setup
, and tap under
Network
MA Network Configuration
.
The MA Network Configuration window opens.
2. Tap at
Network Switch
.
MA Network Configuration - Network Switch
3. Tap at the line of the Network Switch you like to reset and tap
Factory Reset
.
A warning asks if you want to reset all MA Network switch settings to factory defaults.
4. Tap
Ok
.
It might take a little while for the process to complete.
The MA Network Switch restarts. All settings are set back to the factory defaults.
To see the MA Network Switch in the MA Network Configuration window again, it is necessary to add the MA Network
Switch again. For more information see
For more information to the MA Network Switch factory defaults, see
MA Network Switch - Factory Defaults
48.15. Delete MA Network Switch from the network configuration
1343