MA Lighting grandMA2 User Manual - page 1205
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
3. Under List of Universes is a column RDM. Tap and hold in the cell until
On
is displayed for that universe you
want to turn on RDM.
RDM is turned on for the selected universe. A
green RDM icon
is displayed for this universe in the universe
pool.
40.2. Match RDM devices
After RDM (= Remote Device Management Protocol) is turned on the grandMA2 starts to discover RDM devices. The
discovered RDM devices are displayed in the RDM devices window. On the left hand side there are the fixture types,
on the right hand side the fixtures.
To work with sensors or notifications the RDM devices have to match to the patch. That means you have to select
which fixture of the patch belongs to which RDM fixture. Footprint and DMX address have to be the same.
There are two ways to match RDM devices:
Match to fixture manually
The match to fixture manually is the preferred way when you are not sure if the MA Fixture and RDM Fixture have the
same DMX address and the same DMX footprint. If you already double-checked the DMX address and the DMX
footprint use the
function.
1205