MA Lighting grandMA2 User Manual - page 602
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
8. Change the Name of the user to something that makes sense.
9. Add a password if you want one.
10. Select the User Profile you just created.
11. Change the user Rights if you need to.
12. Tap the
Login
button if you want to login immediately as this new user.
11.3. User specific settings
There are a lot of settings that follow the User (Profile).
Most are found in
Setup
and in the
User
tab.
In the User tab you can also see the name of the currently logged in user.
Defaults
The default section contains all the settings used when creating different elements. It is separated into four sub
sections.
Sequence Defaults
The sequence defaults are the settings used when storing cues.
It is mainly the different timings used for fades and delays.
It also has the default trigger.
Follow this link to read more about the Sequences.
Preset Defaults
The Preset defaults contain four different settings. They are not described here, please read the
topics
instead.
Layout Defaults
Tapping the Layout Defaults will open the settings for the Layout View on the entire screen.
Follow this link to read more about the Layouts.
Command At Defaults
This section only have one setting.
It is the preferred color engine when using the Color Picker or when grabbing a color from a different fixture.
Window Settings
This section keeps all the user settings for the different windows. The settings can be changed here, but it could
make more sense to change them in the actual sheets and windows. There you open the options and in the title
bar of the options, you can tap the
Save to Default
button. These are the settings that are stored to default.
Read about the different settings in each of the help pages describing the different windows.
Grand Master & Misc. Keys
602