MA Lighting grandMA2 User Manual - page 732
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Follow Mask
Follow Mask
is available in Channel, Fixture, Content, and Tracking Sheets.
Read about it in the
Sheet Options - Layer Mask topic
.
Set1 through Set10
There can be up to 10 "Set" buttons. They are a little bit different depending on the sheet.
They can all be edited by right clicking them with the mouse (or press
Edit
and then the button) in the title bar.
Channel Sheet & Fixture Sheet:
The set buttons functions as masks that can be toggled On or Off.
The first 5 set buttons have a default loaded mask, but can be changed. Read mode below.
Read more about masks in the
.
Content Sheet & Tracking Sheet:
All 10 set buttons functions as masks that can be toggled On or Off.
Read more about masks in the
.
Executor Sheet:
There are only 5 set buttons available.
The set buttons function as a special kind of mask. They can be used to select what columns in the sheet that
should be visible.
Read details about this in the
Using different view Sets in the Sheets topic
Prog Only
This is the Set1 button with a default assigned mask. This is default for Channel and Fixture Sheets. It can be
changed.
Read more about masks in the
.
Active Only
This is the Set2 button with a default assigned mask. This is default for Channel and Fixture Sheets. It can be
changed.
Read more about masks in the
.
Parked
This is the Set3 button with a default assigned mask. This is default for Channel and Fixture Sheets. It can be
changed.
Read more about masks in the
.
732