MA Lighting grandMA2 User Manual - page 945
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Important:
It is very important that there is no space between the minus symbol and the number.
The attributes are different depending on what fixture types are patched in the show. The list of attributes and their
(screen)names can be seen using the
[Channel]> List Attribute
The names listed in the column called
LibraryName
needs to be used with the replace function - do not use the
ScreenName.
Replacing values with presets (objects)
As a rule it is only possible to replace values with values and objects with objects. So replacing a stored value with a
preset is not possible as a direct action. But there is a way by first searching the value maybe limited to a specific
object like a sequence.
In this example the stored dimmer value of 50 is to be replaced by a dimmer preset. First the value is searched in
sequence number 8:
[Channel]> Search Value 50 If Sequence 8
Then the result is used to limit where the replace is performed and the dimmer attribute (object) is replaced with
the preset:
[Channel]> Replace Attribute "Dim" With Preset 1.5 If SearchResult
945