MA Lighting grandMA2 User Manual - page 640
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Open the CITP Network Configuration window by pressing the
Setup
key and then tap the
CITP Network Configuration
in the menu.
The CITP Enabled button in the upper right corner enables the CITP protocol on all consoles in the session.
The IP address listed next to the close button is the Multicast address used by CITP. Pressing it allows you to change
the used IP address, please only do this if there is a really good reason for it.
The configuration have four tabs. Only the MediaServers tab is active right now.
LightingConsoles tab
This part is not implemented yet.
MediaServers tab
Here you add the 3rd party media servers. Press the
Add
button to manually add a media server. Or you can use
Add Present
to automatically add all the Media Server in your network (the ones using CITP). The IP address of the
server needs to match the IP address in the IP column.
The
Delete
button deletes the highlighted line.
It could look like this:
CITP Network Configuration - Media Servers with active server
If the line has a red background then the server is not present or it have CITP disabled.
640