MA Lighting grandMA2 User Manual - page 1097
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
resolution screens. The images used in the description below are typically show with the minimum size possible.
It needs to be enabled in the Global Settings:
Setup -> Console -> Global Settings -> Remotes
Here is a setting called "Remotes" with two options:
Login Disabled
and
Login Enabled
.
Simply open a browser on a computer or handheld device and type the IP address of the station that needs to be
remote controlled.
Then a login pop-up appears:
Web remote login
It is not possible to login as the default "Administrator" user.
There is a limit of three remote users logged in at the same time.
After a login with a valid user the web remote interface is accessible.
Navigating the remote
The
gives access to the Settings. Here it is possible to change between two different modes:
Phone
and
Tablet
.
This changes a few of the windows. It also changes the navigation bar at the top.
This is the
Phone
mode:
Navigation bar - phone mode
1097