MA Lighting grandMA2 User Manual - page 1187
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Executor CLI = off
This macro will turn off the
Exec CLI
setting in the Local settings in Setup.
No.: CMD:
Info:
1
Assign Root ."Settings"."Local" /ExecCLI=off
It assigns a new value for the "ExecCLI" option in the local settings. The local settings are addressed using the
names of the settings and the "local" part of the settings.
ExecTime on/off
This macro can be used to turn on or off (toggle) the Executor Time fader (the one shown on screen 2 lower right
corner).
No.: CMD:
Info:
1
Toggle SpecialMaster "grandmaster"."exec time"
Toggles the "Set Time" function
on the Executor Time fader.
It sends a command to a special master in the "grandmaster" group. The special master is called "exec time"
(Executor Time).
Replace Fixture in Sequence
You can use this macro if you need to replace a fixture with a different one in a specific sequence.
No.: CMD:
Info:
1
Replace Fixture (old Fixture?) With Fixture (New Fixture?) If
Sequence (Sequence number?)
This macro uses three pop-ups asking for the old and new fixture numbers and the sequence number. The pop-ups
a re displayed when the macro reaches the parentheses. The title bar of the pop-up displays the text written inside
the parentheses.
Preset Live Fade
1187