MA Lighting grandMA2 User Manual - page 786
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Have a group pool visible. Press the
Assign
key, then the group in the group pool, and then any of the keys
associated with the executor where you want the group master.
Using the assign menu
You can also open the
Assign Menu
for the executor and use that to assign a group.
Tap the area on the mini executor view (at the bottom of screen 3 and 4) marked red in this picture:
Mini executor with open Assign Menu
This will open the Assign Menu on one of the screens (default is screen 1) - read more about the Assign Menu
Make sure the
Function
part of the Assign Menu is visible by tapping
Function
on the right side of the menu - or
possible pressing
U1
if the menu is on screen 1.
In the lower right side of the view you will find a button called
Group Master
- tap this or press the
X8
key (if it is
on screen 1).
This will list all the available groups on the right side of the menu. Here you can select the group you want to assign.
When you are done you can close the
Assign menu
by tapping the
X
in the upper right corner.
Group master modes
The group masters can have three different modes. They are called
Positive
,
Negative
, and
Additive
.
When a group is assigned to an Executor, then open the Assign Menu and look at the
Options
part of it. You can
change to it by tapping the
Options
button on the right side of the menu - or possible by pressing the
U2
key if
the menu is on screen 1.
In this menu there is only one button called "Mode". Tapping this will open the
Select Group Master Mode pop-up
:
Select Group Master Mode pop-up
Here you can select what mode the Group Master should use.
786