MA Lighting grandMA2 User Manual - page 814
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Executor Editor
This view has all the columns and rows as the Sequence Executor Sheet. It cannot be customized as the sheet.
It has a few buttons around that is not available in the sheet version:
Edit Previous Cue:
This will edit the previous cue. Editing a cue means that values stored in the cue will become active values in the
programmer. Values can be changed and the Update key can be pressed to update the cue. The cue that is
being edited has a red frame around it. Pressing the Esc key will cancel the edit function - and close the pop-up.
Edit Current Cue:
Same as above except the cue being edited is the current active cue.
Edit Next Cue:
Same as above except it is the next cue that is being edited.
Cmd Disable:
This will disable all the commands written in the "CMD" column. If the commands are disabled then the
command text color will be red.
Test Cmd:
This will execute the command written in the selected row.
Label:
This can be used to give the sequence a label.
Notice that when this pop-up is open, then the Encoder Toolbar is different. It could look like this:
814