MA Lighting grandMA2 User Manual - page 504
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
9.2.254. Select Keyword
To get the Select keyword in the command line, press
Select
.
You can also type
Select
or the shortcut
Se
in the command line.
Description
The Select keyword, selects objects as default objects.
The
selected executor
is the target for all executor related commands, e.g.
Store Cue 4
. The selected executor is
displayed in the
in indicated by green color.
The selected executor is displayed in the Sequence Executor and Sequence Tracking Sheet, if the
Link Mode
is
Link Selected
.
The
selected layout
is displayed in the Layout View, if the
Layout Selection
is
Link Selected
. For more information,
see
.
The
selected mask
is used by any sheet (except DMX sheet), if the option
Follow Selected Mask
is
On
.
The
selected filter
is used by any action involving fixture parameters, e.g. store or delete a cue.
The
selected timer
is displayed in the clock, if the option
Select Timer
is
Link Selected
.
The
selected timecode slot
is displayed in the clock, if the option
Select TC Slot
is
Link Selected
.
The
selected timecode
is displayed in the timecode view, if the option
Timecode
is
Link Selected
.
The
selected camera
is displayed in the stage view and in the MA 3D, if the
Camera Selection
is
Link Selected
.
Syntax
Select [Executor-object]
Select Layout [ID]
Select Mask [ID]
Select Filter [ID]
Select TimecodeSlot [ID]
Select Timecode [ID]
Select Timer [ID]
Select Camera [ID]
Examples
Select executor 5 as the default.
[Channel]> Select Executor 5
504