MA Lighting grandMA2 User Manual - page 1053
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Sections Corresponding to the Effect Mini Executor
The third line (displaying BPM) and the forth line (displaying s) correspond to the speed master.
Speed master in an effect assigned to an executor
BPM
corresponds to the executor time that is applied to the effect as a factor. 60 BPM correspond 1:1.
Important:
If you tap the upper area of the mini executor, the
opens.
Tapping the lower area of the mini executor opens the
.
Generally speaking, the speed of an executor influences the speed of an effect. For more information on the speed
master in an executor see
.
Important:
The master of an effect executor affects the size of an effect.
s
corresponds to the master fade time that is applied to an effect when turning it on or off.
Important:
Speed groups only work if they were assigned to the executor and not the effect itself.
30.9. Live Edit an Effect
It is possible to live edit effects during a show if necessary.
To live edit an effect:
1. Select fixtures.
2. Tap a template effect.
Hint:
The sense and purpose of an template effect is that it is possible to select a template, adjust it without
modifying the actual effect.
3. The encoder toolbar for live effects – also called the "Quick & Dirty Encoder Toolbar" – opens.
Encoder toolbar for live edit
1053