MA Lighting grandMA2 User Manual - page 1322
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
48.5. Change switch ID
The switch ID is used for better identification in the network.
You can change the switch ID of the MA Network Switch.
The allowed characters are 1...999.
Requirement:
Added MA Network Switch to the network configuration
1. Open the MA Network Configuration.
- Press
Setup
, and tap under
Network
MA Network Configuration
.
The MA Network Configuration window opens.
2. Tap at
Network Switch
.
MA Network Configuration - Network Switch
3. Tap and hold the cell in the column Switch ID or tap in the cell and press the screen encoder until the
Calculator
opens.
4. Enter the new switch ID, for example 2.
5. Press
Please
.
The MA Network Switch has a new ID. The new ID is saved in the startup configuration.
48.6. Configure ports of the MA Network Switch
This topic describes the different port settings and
You can configure the following options:
1322