MA Lighting grandMA2 User Manual - page 454
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
sACN TTL (only if the
protocol is sACN)
0...255
TTL = Time to live
Assign the number of routers
(hops) that multicast traffic
is permitted to pass through
before expiring on the
network. For each router
(hop), the original specified
TTL is decremented by one
(1). When its TTL reaches a
value of zero (0), each
multicast datagram expires
and is no longer forwarded
through the network to
other subnets.
sACN Start (only if the
protocol is sACN)
0...63999 or "Original"
Assign the sACN universe.
Original uses the same as
patched.
Delay(ms) (only if the
protocol is sACN or Art-Net)
0.000...2.500
Assign the packet delay.
FrameDelay (1/30s)
0...8
Assign the frame delay.
Parameter
Parameter Value
Description
Examples
To store the selected fixtures in the existing pixel mapper area 1 output 2 with a horizontal +x axis and a vertical
+z axis, type in the command line:
[Channel]> Store PMArea 1.2 /axis=+X+Z /noconfirm
To assign the pixel mapper area 1 the name "Sunstrips", type in the command line:
[Channel]> Assign PMArea 1 /name="Sunstrips"
9.2.213. Preset Keyword
To get the Preset keyword in the command line, press
Preset
.
You can also type
Preset
or the shortcut
Pres
in the command line.
454