MA Lighting grandMA2 User Manual - page 511
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Lists available Ethernet interfaces along with their IP addresses in the command line feedback window.
Important:
Do not use DHCP on eth1, unless you are a skilled network operator.
For more information on what DHCP is see the
For more information on how to use DHCP see
9.2.262. SetNetworkSpeed Keyword
To go to the SetNetworkSpeed keyword, type
SetNetworkSpeed
in the command line or use the shortcut
SNS
.
Description
The SetNetworkSpeed keyword, changes the port speed of the first network adapter of grandMA2 consoles and MA
NPU.
It makes sense to reduce the port speed, if grandMA series 2 devices are together with grandMA series 1 devices.
Important:
To apply the changed port speed by using the SetNetworkSpeed keyword, a restart is necessary. If you
do not restart the device, the new port speed is not applied.
Hint:
To double-check the link speed, use the
or press
Setup
I
column Network I
tap
MA Network Control
I column Link Speed.
The SetNetworkSpeed keyword is a function keyword.
Syntax
SetNetworkSpeed 100 [IP address]
SetNetworkSpeed 1000 [IP address]
Example
Set the port speed of the first network adapter to 100 Mbit.
[Channel]> SetNetworkSpeed 100 192.168.0.32
511