MA Lighting grandMA2 User Manual - page 1287
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Module view in the fixture type editor
Here is a view of the first module of the fixture. There are four buttons on the right side of this editor. The top three
open the three managers mentioned above. The bottom button on the right side opens the RDM Notification - Read
about RDM and creating notifications in the
Configure RDM Notifications topic
There are some buttons at the bottom of the editor. There are buttons to
Add
and
Delete
rows in the different
sections in the editor.
Edit Row
opens the editor for the selected row, it goes "into" the row. Read below for more
is used to control if the fixture can use
opens a pop-up that shows errors or warnings for the selected element. In the lower
right corner there can be up to four different arrow buttons. Up and Down arrows will move up and down in the
rows. Left and Right arrows will change between different elements. The elements can be modules or when editing
a row it can change between different row in the upper level (read more below).
Grayed out buttons do not have any functions.
Edit Module
The title bar in the
Fixture Type Editor
shows what is being displayed in the editor. In the picture above it is
displaying the
Channels
of the module called "Main Module" of the fixture called "VL3500 Spot 00". Here the word
"channel" is used as DMX channels and the list is actually the different
Attributes
in the module.
There are several columns in this part of the editor. This is a short description of them:
No.
:
This is a number for the row. Each attribute has its own row. This number cannot be edited
1287