MA Lighting grandMA2 User Manual - page 795
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Temporary store options
4. Enable the buttons marked by the red box in the screenshot above.
Presets – store options
5. To disable the filter, tap
Preset Filter
.
Important:
Every preset pool –
except for the preset pool All
– has a filter as a default setting. This filter allows to
store the value equivalent to the pool only.
6. To choose the store option of the preset type, tap
Preset Type Default
and then toggle between default,
selective, global or universal.
Important:
The store option is
Preset Type Default
by default. This setting falls back on the default store option of
a preset pool.
7. To allow that presets are stored within other presets, tap
Allow Embedded
.
For more information see
8. To take the preset link actively into the programmer after storing the preset, tap
Keep Activation
.
9. To keep the previous settings when storing another preset, tap
Save as Default
in the header of this dialog.
10. To close the
Temporary Store Options
, tap in the upper right corner of the pop-up.
795