MA Lighting grandMA2 User Manual - page 1222
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
40.7. Use the RDM sheet
To open the
RDM sheet
tap at an empty space in the user defined area, tap at
Sheets
and then
RDM
.
RDM sheet
The RDM sheet is used to have a quick overview about the discovered RDM devices, their parameters, and their
sensors.
You can set RDM parameter, see
.
You can monitor RDM sensors, see
The first title bar button in the RDM sheet allows to filter the RDM sheet by:
-
All:
Displays all RDM discovered RDM devices
-
Current Fixture Type:
Displays to the selected fixture or channel the RDM devices with the same fixture type.
-
Selection:
Displays only the RDM devices of the fixture or channel selection
-
Alerts/Warnings:
Displays only the RDM devices with a notification
-
Unmatched Fixtures:
Displays only the unmatched RDM devices
The second title bar button in the RDM sheet allows to filter the RDM sheet by:
-
Parameters and Sensors
-
Parameters
-
Sensors
For a better overview, you can sort every column up-and-down. To sort a column tap and hold in a header cell of
the RDM sheet or right mouse click in the header cell.
40.8. Unmatch RDM devices
1222