MA Lighting grandMA2 User Manual - page 736
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Follow Mask
Set1
Set2
Set3
Set4
Set5
Set6
Set7
Set8
Set9
Set10
Readout
Edit CueOnly
MixColor Readout
RDM Sheet
The RDM sheet do not have any options, but it does have two title buttons.
They are described in the
15.3.5. Assign executor
This tap is only available in the Content, Executor, and Tracking Sheets.
It shows a list of all the executors with assigned sequences.
Tapping one of the executors in the list will make this the assigned executor for the sheet. This means that "Link
Mode" is now set to "Not Linked", which means that the sheet is locked to the executor you have tapped in this list.
Read more about the Link Mode in the
.
15.3.6. Mask (local)
This tab is available in the Channel, Fixture, Content, and Tracking Sheets.
It is used to define a local mask for a specific sheet. You can load a mask from the Mask Pool or you can create a
new one. The mask is applied when "Enable Mask" is On. If "Follow Selected Mask" is also on, then the local mask is
not applied, but instead the mask selected in the mask pool is applied.
Enable Mask and Follow Selected Mask is described in the
.
Please read the
for information about masks in general.
The
describes how to make masks and it describes the different buttons seen in this tab.
15.4. Layer in Sheets
736