MA Lighting grandMA2 User Manual - page 481
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
The RdmSetParameter has the following options:
Option
Option
shortcut
Option value
Description
multipatch m
0 = multipatch for
all fixtures
1 = multipatch for
one fixture
and so on
Sets the multipatch index.
UID
No shortcut
available
e.g.
"43500F019FCB"
Sets the RDM UID to send RDM
Parameter to the device.
Examples
To set the DMX start address to 3 of a RDM device, type in the command line:
[Channel]> RdmSetParameter dmx_start_address 3 / UID = 43500F019FCB
To invert the display of a RDM device for the selected fixture, type in the command line:
[Channel]> RdmSetParameter invert_display 1
9.2.234. RdmSetpatch Keyword
To get the RdmSetPatch keyword in the command line, type
RdmSetPatch
or the shortcut
RdmSetPat
in it.
Description
With the RdmSetPatch keyword you set the DMX address of a RDM fixture by using the command line.
If no Unique ID is given, the fixture selection will be used.
The RdmSetPatch keyword is a function keyword.
For more information, see
.
Syntax
RdmSetPatch [DMX address] / [Option] = [Option Value]
Options
To get a list all available options to the RdmSetPatch keyword, type in the command line:
[Channel]> RdmSetPatch /?
481