MA Lighting grandMA2 User Manual - page 872
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Example 2
If you want to assign the "Empty" function to the executor fader, then it is necessary to use the fader as the location
[Channel]> Assign Empty Fader 9
Save the Key and fader assignment
The current assignment of key and fader functions can be saved, to the current user profile, using the Assign Menu.
In the Title bar there are two buttons. Tapping the
Save Default [object type] Assignment
will store the current
assignment to the defaults for that type of object. This means that a sequence have one set of defaults and an
assigned Effect will have a different set of defaults.
The defaults are used when the executor gets something assigned.
Tapping the
Load Default [object type] Assignment
will load the currently saved default to the keys and faders.
Executors can be extended to use up to 5 executors in the width. Read more about this below. The number of keys
and faders are then changed. Each width size has a different set of default key and fader assignment for each object
type.
This means that a sequence using 1 executor width have one set of defaults and the same sequence using two
executor widths will have a different set of defaults.
Change the Width of Executors
Sequence and Effects assigned to an executor can use more than one executor in the width - up to five.
A timer assigned to Button Executors can use up to two executors in the width.
This is changed using the Assign Menu (see the top of this topic for more about using the Assign menu). The left side
of the Function page of the Assign Menu could look like this:
872