MA Lighting grandMA2 User Manual - page 1284
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
4. Select you USB stick and press
Enter
or
Please
.
The
MA installer screen
opens.
MA installer screen
5. Choose one of the following options:
- If you want to update and keep the show data, choose
update software and keep shows/user data
.
The touch screen calibration, the network station name, and the IP address will be remained.
- If you want to update and delete the show data, choose
update software and CLEAN shows/user data
.
The touch screen calibration, the network station name, and the IP address will be remained.
- If you want to update on a clean hard drive, choose
factory reset
.
The hard drive will get a new partition and it will be formatted. All data will be deleted.
You have to calibrate the touch screens. The factory reset will set a DHCP IP address.
- If you want to backup all show files first before doing an update or factory reset, choose
backup all shows
.
- The memory test is for service members only.
6. Follow the on screen instructions.
The console is updated.
44.4. Restart from Linux
1284