MA Lighting grandMA2 User Manual - page 1272
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
43.2. Export by using user interface
There is a dedicated GUI for exporting
Macros
,
Effects
,
Masks
,
MAtricks
,
Gobo Bitmaps
,
User Profiles
and
DMX Nodes
.
All of these, except
Gobo Bitmaps
and
DMX Nodes
, works similar. In the following example, it is an effect that has to
be exported.
Requirement:
To be able to export an effect, there needs to be at least one effect in the effect pool. If exporting to a USB stick,
then a stick needs to be connected to the console or onPC.
Open the
Setup menu
and tap
Import Export
followed by
Export
and finally
Effects
This opens a pop-up like this:
Export effect pop-up
Steps:
1. Select the tab where to export the effect to. A USB stick called "Shows" is selected in the image above.
2. Pick the effects to export on the left side. Select multiple effects by holding
Ctrl
on the keyboard and
tapping the effects in the effect list. The selected effects get a blue background. The effects are exported to
an XML file, that can contain one or more effects.
3. On the right side, there are a list of existing XML files on the destination, selected in the tab above.
1272