MA Lighting grandMA2 User Manual - page 693
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Arrangement Wizard - Move
This gives you the possibility to move a selection of fixtures.
There are four settings:
Value:
This is the value that tells you how far you want to move the fixtures. A positive number usually moves things to
the right or up (depending on your view position). A negative number moves the selection in the opposite
direction.
Align Mode:
This is the usual Align options. This allows you to combine the move function with Align.
Axis:
This is the axis plane in which the fixtures will move.
Relative:
With this you can move the fixture to its relative position.
When you are happy with your settings you can tap the
Apply
button once or several times to keep moving the
fixtures (relative). If you only want to move it once more and then close the pop-up you can use the
Apply & Close
button. If you are done moving or just want to close the pop-up without applying any new values you can use the big
X
in the upper right corner.
693