MA Lighting grandMA2 User Manual - page 1055
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
30.10. Running Effects
The window
Running Effects
displays all the effects that are currently running.
To open Running Effects:
1. Tap somewhere in the
user-defined area
.
2.
Create Basic Window
opens.
3. Tap
Playbacks
.
4. Then tap
Running effects
.
5. The window opens.
Running effects
The window Running Effects consists of four sections:
Executor:
Displays all effects running in an executor.
Pool:
Displays effects that were started as a pool playback.
Programmer:
Displays effects in the programmer. Whereas the effect is stored in the effect pool and is running the programmer.
Effects created in the programmer are not displayed in this window. For more information see
Sequence:
Displays sequences containing effects that are currently running.
6. To apply the following functions to the fixtures or channels currently in selection, tap
Follow Selection
in
the title bar of the window.
7. Turn off all effects in the section
Programmer
:
Tap
Programmer All Off
.
8. Then, turn off a single effect in the section
Sequence
:
Tap
Off Mode
in the title bar and then tap a sequence in the column Sequence.
Important:
Please note that tapping
Off Mode
turns off the entire sequence.
1055