MA Lighting grandMA2 User Manual - page 679
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Select All:
Tapping this button will select all the DMX addresses that you are affecting by the DMX tester.
Release Current:
This will release the currently selected DMX address from being affected by the DMX tester.
Release Others:
This will release all other DMX address but the currently selected DMX address from being affected by the DMX tester.
Release All:
This will release all DMX address from being affected by the DMX tester.
Park Current:
This can be used to park the currently selected DMX address at the current DMX value. Read more about the park
function in the
Unpark Current:
Using the DMX tester with the command line
You can also do some DMX testing from the command line.
To do this you need to use the
Please follow the link above to read details about the keyword.
The general idea is that you type
DMX [address (range)] At [Value (range)]
This will set the DMX address at the value.
To release a channel you type:
Off DMX [address (range)]
to release a single address (range) from the DMX tester.
Off DMX Thru
Will release all DMX addresses.
13.10. DMX and Parameter lists
679