MA Lighting grandMA2 User Manual - page 594
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
ASCII Show Read pop-up - Overview
In the overview the console manufacturer and console type that made the export can been seen. It is also possible
see the show file name from the ASCII file.
In the Overview tab it can be decided where the Default Sequence should be. And if should be created and
assigned to an Executor and Executor page.
It can be decided if the submasters from the ASCII file are wanted and what page they are desired. It can be chosen
from what group number the inhibits from the ASCII file are wanted.
It is also possible to choose the first sequence number from the Effects. And if they should be assigned to Executors
and then the first Executor page.
Effects from ASCII shows are imported as sequences.
Attribute
Before importing any data, you need to make sure the attributes from the ASCII file matches the attributes in the
grandMA.
This can be matched and changed in the Attribute tab. It could look like this:
594