MA Lighting grandMA2 User Manual - page 463
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Description
The Protocol keyword is an object keyword to access the network protocols.
You can store or delete network protocols and assign parameters.
For more information, see
Syntax
[Function] Protocol [Network Protocol ID] . [Row ID]
Assign Protocol [Network Protocol ID] / [Parameter] = [Parameter Value]
Assign Protocol [Network Protocol ID] . [Row ID] / [Parameter] = [Parameter Value]
The following table displays the available network protocol along with their ID.
Network Protocol
ID
Art-Net
1
ETC Net2
2
Pathport
3
sACN
4
Shownet
5
Kinet1
6
Parameter
The following table displays the assignable parameter by use the command
Assign Protocol [Network Protocol ID] /
[Parameter] = [Parameter Value].
Network Protocol
Parameter
Parameter Value
Description
Art-Net, sACN, Kinet1
OutActive
"On", "Off"
Assign if the output is set
to on or off.
Art-Net, sACN, Kinet1
InActive
"On", "Off"
Assign if the input is set to
on or off.
Art-Net
MaxUnicast
0...10
Only if the mode is
OutputAuto:
Assign the maximal
amount of members until
Art-Net switches from
unicast to broadcast.
Art-Net, ETC Net2,
Pathport, sACN, Shownet,
Kinet1
Info
"Information text"
Assign additional
information.
463