MA Lighting grandMA2 User Manual - page 490
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Parameter
The following table displays the assignable parameter via the command line, using the
.
Parameter
Parameter Value
Description
name
"remote name"
Assign the remote name.
Only for
analog
remote:
input
1...64
Assign the input from the conntected DC
remote control.
Only for
MIDI
remote:
note
0...1023
Assign the MIDI note.
Only for
MIDI
remote:
channel
1...16 or "All"
Assign the MIDI channel.
Only for
DMX
remote:
DMX
1.001 to 256.512
[universe]. [dmx
address]
Assign DMX universe and address.
type
"None", "Exec", "CMD",
"Hardkey"
Only for DMX remote:
"Programmer"
Assign the type of action the console does
when the contact is active.
page
0...9999 or "current"
For type Exec. Assign the executor page
number. Current is for the active page.
executor
1...220
For type Exec. Assign the executor number.
button
"Button 3", "Button 2",
"Button 1", "Fader"
For type Exec. Assign the button or fader the
console should activate.
keycode
"every hardkey", e.g.
"X1", "Go", "List"
For type Hardkey. Assign the hardkey the
console should activate.
cmd
"a command" e.g.
"Group 1"
For type CMD. Assign the command the
console should execute.
info
"additional information" Assign additional information.
Examples
Store new DMX remote.
[Channel]> Store Remote 3.1
490