MA Lighting grandMA2 User Manual - page 393
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
9.2.146. Learn Keyword
This page describes the syntax and how to use the learn command.
To go to the learn command press
Learn
on the console.
Learn is in the command line now.
[Channel]> Learn
Description
With the learn command you set the speed by tapping for:
Chaser
Effects
Master rate
Master speed
Syntax
Learn [Object-list]
Examples
Here are a few examples how you can use the learn command.
Example 1
Let´s assume you will set the speed of a chaser.
Press and hold
Learn
and press the executor button of the chaser several times in that speed you like to have it.
The chaser learns the speed of the tapping of the executor button.
Example 2
Let´s assume you will set the speed of an effect.
Press and hold
Learn
and press the executor button of the effect several times in that speed you like to have it.
The effect learns the speed of the tapping of the executor button.
Example 3
Let´s assume you will set the speed of the master rate.
Press and hold
Learn
and press the executor button of the master rate several times in that speed you like to have
it.
The master rate learns the speed of the tapping of the executor button.
9.2.147. LeaveSession Keyword
393