MA Lighting grandMA2 User Manual - page 352
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
9.2.101. Extract Keyword
To get the extract keyword in the command line type
Extract
or the shortcut
Ext
in the command line.
Description
Extract is a function that applies hard values in the programmer and breaks any referenced links.
The Extract function used the same syntax as the At keyword. For more information see
Extract works recursively and breaks references also in subobjects, for example, a preset in a cue in an extracted
sequence.
Extract will obey the At filter and the program time.
Syntax
Extract [Object list]
Examples
To set the fixture selection to the preset "drummer". later changes to preset "drummer" will update the values,
type in the command line:
[Channel]> At Preset "drummer"
To set the fixture selection to hard values of preset "drummer". later changes to preset "drummer" will not affect
the values, type in the command line:
[Channel]> Extract Preset "drummer"
To break the references (converts attributes to hard values in the programmer) for the fixture selection type in the
command line:
[Channel]> Extract Selection
To set the fixture selection to the hard values of Cue 4 type in the command line:
[Channel]> Extract Cue 4
9.2.102. Fade Keyword
352