MA Lighting grandMA2 User Manual - page 218
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Network
Show
Power
Chat
CITP
Some icons can be disabled or enabled in the message center options. For more information, see
.
The following table explains what the icons in the command line and in the message center mean.
Icon
Meaning
The console runs from the battery power only.
The console is in a standalone mode. For more information, see
The console is master of a session. For more information, see
.
The console is slave of a session. For more information, see
.
Invite is disabled in the Setup - MA Network Control.
A new message is received. For more information, see
Network cable or connection is missing or defect.
Receive CITP video.
DMX tester output is active.
Receive timecode SMPTE signal.
Receive timecode MIDI signal.
A timecode record is active. For more information, see
or
.
There are fixtures or channels in the Patch & Fixture Schedule without a patch
address. For more information, see
.
A patched universe has no output on a DMX port.
More DMX channels are patched than available parameters.
The Exec CLI (= Command Line Interaction) or the Default Go, GoBack, Pause
CLI is off. For more information, see
A world is active. For more information, see
DMX channels are parked. To unpark DMX channels, see
.
Preview is on. For more information, see
218