MA Lighting grandMA2 User Manual - page 1275
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
In the following example is a macro that has to be imported from a USB stick. But it is the same procedure for the
other objects.
Requirement:
If the object is stored on a USB stick, plug the USB stick into the console or onPC.
Steps:
1. Open the
Setup menu
and then tap the
Import Export
button followed by the
Import
button and then
finally the
Macro
button.
This opens a pop-up like this:
Import macro pop-up
2. Select the tab that matches the USB stick.
3. Select the .XML file on the left side, that contains the macro to import.
4. On the right side is a list of the macros that are stored inside the XML file. An XML file may contain one or
more macros. Select the ones to import. Select multiple macros by holding the
Ctrl
key on the keyboard
and tapping the macros on the screen. The selected macros get a blue background.
5. [Optional] Activate
Always ask for Name
(tap it until the text is yellow) to rename the macros when
imported.
6. [Optional] Activate
Confirm
(tap it until the text is yellow) to have a confirm pop-up to appear, after the
import.
7. [Optional] Activate
Overwrite
(tap it until the text is yellow) to overwrite any macros that might already exist
on the location where to import to.
1275