MA Lighting grandMA2 User Manual - page 1207
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
6. If you have the to be matched fixture selected in the table tap at
Match to Fixture
.
The
Match to MA Fixture
pop-up opens. This pop-up displays all fixtures in your patch.
For a better overview you can:
- Search in the green search field for fixture or channel ID.
- Select in the title bar one of the patched layers.
- Choose in the title bar if you want to see
All
fixtures,
Unmatched
fixtures or
Current FixtureType only
.
Match to MA fixture pop-up
7. Tap in the table at the fixture you like to match and tap
Match
.
Important:
RDM universe and DMX universe has to be the same. If they are not the same, double-check the network
configuration under
Setup -> Network -> MA Network Configuration
and / or the DMX wiring.
The patch of the selected fixtures matches to the RDM device. A successful match is indicated by green check
marks in the field below the fixture table.
1207