MA Lighting grandMA2 User Manual - page 694
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Circle
This is the circle view of the Arrangement Wizard:
Arrangement Wizard - Circle
It can be used to arrange in circles or spirals.
There are six settings here.
Radius Start:
This specifies the radius at the beginning of the circle. If this is different than the
End
radius the result will be a
spiral.
Radius End:
This specifies the radius at the end of the circle. If this is different than the
Start
radius the result will be a spiral.
Angle Start:
Used to specify the beginning angle of the circle.
Angle End:
Used to specify the end angle of the circle. If the Start and End angle is not the same "degree" number then you
will create arcs.
Plane:
With this you can choose in what (stage) plane your circle will be made.
Relative:
With this you expand your circle every time you tap the
Apply
button.
694