MA Lighting grandMA2 User Manual - page 757
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-30 | tech.support (at) malighting.com | www.malighting.com
Version 3.3
1
Hint:
It is also possible to set the focus on the numbers or letters of the beam by tapping the buttons on the
left at the bottom of the dialog. See the red box.
The white circle in the middle of the dialog:
Represents the beam of light coming from the fixture.
Numbers around the beam:
Represent blades that can be pulled up and down accordingly.
Letters around the beam:
Represent blades that can be pulled up and down, and sideward as well.
Blade Rotate:
Displays the angle in which the entire blade system rotates.
Rotate to Match POV:
Rotates to match the point of view.
Green boxes with values:
Represent corresponding blade parameters.
Rotate:
Sets the focus on Blade Rotate.
POV:
Sets the focus on Rotate to Match POV.
Link Encoders:
Tapping Link Encoders enables the following:
Angle Mode
:
Moves the angles around a set point.
Set All
:
Selects all parameters.
Invert All
:
Inverts the selection.
Reset POV:
Sets the point of view into its initial position.
Reset Rot.:
757